To install a floating shelf, please follow these steps.
1. Choose the location on your wall that you would like your shelf to be, and mark the centre point with a pencil.
2. Measure the distance between the holes in the back of the shelf, divide this by 2, and then mark this measurement either side of your centre point mark on the wall.
3. Using a spirit level, join all 3 marks on the wall.
4. Check there is no wiring near to where you will be drilling.
5. Mark the spots for your drill holes.
6. Drill the holes into the wall with a masonry bit and install the wall plug.
7. Screw the floating rods into the wall, ensure they are tight and level.
8. Place the shelf holes onto the rods, and push the shelf against the wall.
For more detailed instructions, please visit our guide here.